Product

Ready-Mixed Concrete

Low-heat Concrete
A type of concrete with reduced heat of hydration by substituting admixtures, such as fly ash, and blast furnace slag powder, in order to prevent cracks due to drying shrinkage or heat of hydration
Because of continuously increasing strength, the increased single-use quantity and use of cement may lead to the structure’s durability setbacks owing to cracks caused by heat of hydration.
Therefore, in order to reduce heat of hydration, fly ash was substituted up to 20 to 25% and used high-performance AE water-reducing agent. Minor level of strength is reduced, but compared to standard concrete, approx. 10 to 15℃ of heat of hydration is reduced and delayed 12 hours to reach max temperature, which result in highly durable low-heat concrete product.

Ready-Mixed Concrete is a type of concrete that is already mixed in proper proportion and delivered to customer via Ready-Mixed Concrete truck.

Because Ready-Mixed Concrete must be applied at the construction site prior to hydration, its range of supply is restricted.

Also, there are a vast number of mixing ratio as well as maximum allowable aggregate size, compressive strength and slump mix, making Ready-Mixed Concrete best for customized orders.

Therefore, we use high-quality type 1 Portland cement to concentrate on manufacturing Normal concrete as well as highly functional concrete products including high-strength and high-fluidity concrete, ultra-high-strength concrete (80MPa) and low-heat concrete.

We are also well equipped to manufacture specialty concrete products such as pervious, shot and watertight concrete in addition to low-heat concrete, great for deterring cracks.

Overall, our management and manufacturing system can promptly and accurately respond to your assorted requirements for a wide range of high-quality and high-performance cement products.

July 1979 ? Acquired KS certificate
October 1998 ? Acquired KSA / ISO9002 certificates

Characteristics of Asia Remicon

We strive for the finest quality.

In order to maintain the highest of quality, we manufacture our products by our much stricter quality standards than the official KS specifications. We also make most efforts to improve customer satisfaction with our state-of-the-art facility. Blending our quality cement with proper ingredients from local areas, we provide a variety of concrete products from standard to high-strength and fluidity concretes as well as other high-function concretes.
We thoroughly manage our resources with ERP program and conduct over 35 hours of education and training sessions, quality TF competition and technology seminars.

We take A/S (warranty) and customer satisfaction seriously.

We monitor customer demands real-time and have structured our system for prompt and satisfactory A/S (warranty). We listen to our customers closely and opt for making improvements in advance rather than fixing problems after.

We make continuous quality development.

The researchers at our construct materials research center continue to make quality improvements. We have selected the finest research members through industry-university cooperation who continue to make product enhancements through R&D and collection of information. Our R&D teams and technical sales teams strive to supply customized products for our customers, and we operate TQM office to maintain our machineries at optimal condition.

Remicon Specifications

■ Max. Dimension of Aggregate (mm): 15, 20, 25

■ Nominal Strength after 28 Days (MPa):
Standard Strength: 18, 21, 24, 27, 30, 35
High-strength: 40, 45, 50, 55, 60
Pavement Concrete: Bending 4.0, 4.5

■ Slump / Slump Flow (mm)
80, 120, 150, 180, 210 / 500, 600, 700

■ What is max dimension of aggregate?
The diameter of aggregate contents mixed in the concrete cannot exceed certain dimension. Generally, they are categorized by 20, 25 and 40mm. Those below 25mm are used in reinforced concrete and those over 40mm in plain concrete.

■ What is nominal strength?
Compressive strength of 18MPa after 28 days as basis, there are wide range of required strengths for different uses.

■ What is slump?
It refers to the consistency of concrete mix. Higher value indicates higher fluidity. It generally ranges from 50 to 210mm.

* With diverse combinations of aggregate size, nominal strength and slump, there are over 100 different specifications for Ready-Mixed Concrete.

Product

Low-heat Concrete

Properties

A type of concrete with reduced heat of hydration by substituting admixtures, such as fly ash, and blast furnace slag powder, in order to prevent cracks due to drying shrinkage or heat of hydration
Because of continuously increasing strength, the increased single-use quantity and use of cement may lead to the structure’s durability setbacks owing to cracks caused by heat of hydration.
Therefore, in order to reduce heat of hydration, fly ash was substituted up to 20 to 25% and used high-performance AE water-reducing agent. Minor level of strength is reduced, but compared to standard concrete, approx. 10 to 15℃ of heat of hydration is reduced and delayed 12 hours to reach max temperature, which result in highly durable low-heat concrete product.

Generally used in

Underground foundation for large structures
Retaining walls, dams and subway
Structures that require watertightness and durability

Purchase Information

Please first confirm whether your location is within our range of delivery.

Remember when ordering

Please take into account the following when you place an order.

Directions

Headquarter TEL : +82-2-527-6727 FAX : +82-2-527-6699 Directions
Seoul Remicon Plant TEL : +82-31-452-3450~4 FAX : +82-31-452-3730 Directions
Suwon Plant TEL : +82-31-232-0070∼1 FAX : +82-31-239-9227 Directions
Yongin Plant TEL : +82-31-323-0761~5 FAX : +82-31-323-0760 Directions
Daejeon Plant TEL : +82-42-932-4648 FAX : +82-42-932-7999 Directions
Jungbu Plant TEL : +82-42-626-3524~7 FAX : +82-42-626-3528 Directions
Daegu Plant & Gumi Sales Office TEL : +82-54-975-1144∼9 FAX : +82-54-974-0324 Directions
Hongseong Plant TEL : +82-41-634-5003 FAX : +82-41-634-6947 Directions

아세아시멘트의 자료는 로그인 후자료 열람 및 인쇄, 다운로드 이용이 가능합니다.

아이디 등록 및 조회가 되지 않는 고객께서는 043) 649-5430으로 문의해주시기 바랍니다.